BURANDT SIGNATURE SERIES FLOAT 3 iQS SHOCK (KIT OF 4) - ADJUSTABLE
The Burandt Series Lightweight 1.5 FLOAT 3 Intelligent Quick Switch (iQS) kit was developed for harder backcountry riding with less fatigue, without compromising durability. These shocks and modes are tuned specifically to suit Chris Burandt’s riding style.
The FOX iQS system is a peerless suspension package tailored specifically for your mountain sled. FOX’s 1.5 FLOAT 3 EVOL air-sprung shocks are known for their low weight and infinitely adjustable design, taking the edge off chatter while still providing support when sending it big.
The electronically controlled suspension system allows you to adjust the performance of your sled in under a second. Depending on the conditions and terrain, tune your sled to provide you optimal control and comfort in any situation. Never take a break to adjust suspension again, thanks to iQS.
We designed the air-sprung mountain shocks with two primary objectives: weight reduction and ride performance. FOX optimizes the 1.5 FLOAT 3 EVOL shocks through material reduction without a sacrifice of ride quality or structural integrity. We shaved weight from the reservoir walls and mounting hardware to save weight where it counts. The result is an air shock package in a league of its own.
FOX’s position-sensitive damping technology, with origins in desert truck racing, is now applied to the Burandt Series air-sprung shocks. Spiral grooves inside the shock allow the oil to flow around the main piston reducing damping force in the ride zone for a plush feel. The bypass grooves terminate through the final 30% of the travel, forcing oil to only flow through the main piston and providing a significant increase of bottom-out resistance to cushion any hard hits. Our goal was to inspire confidence next time you send it big thanks to the extra support.
FOX iQS is an electronic modal damping control system. This system comprises a Bosch Electronic Control Unit (ECU), custom wiring harness, and electronically actuated valves integrated into each shock.
The three-button switch mounted to your handlebar puts you in command of four unique shock modes. Each mode changes the character and balance of your sled by adjusting the compression damping of each shock. Chris Burandt was instrumental in developing the individual settings and tuning the shocks to his refined taste.
Are you scaling a near-vertical wall? Utilize lockout mode for better flotation and steering control. Lockout your rear track shock to prevent unwanted weight transfer to the rear to keep the sled planted when you twist the throttle. Worn out from a great day on the peaks and ready to motor back to the truck? Engage soft mode for a plush ride down the mountain.
Between lockout and soft are settings to cover the full spectrum of riding from high-flying action to quick transitions boondocking through the trees. Experience a new sense of control on the snow due to less outboard weight.
The FOX iQS system is a straightforward DIY install supported by a thorough step-by-step manual, online videos, and of course, our friendly FOX Service Center technicians.
PART NUMBER | 854-21-018 |
FEATURES |
Burandt-specific tuning Complete shock kit (four shocks) Optimized lightweight shock design Spiral groove bypass One-piece, aluminum spherical bearings Plug ‘n Play wiring harness Bosch ECU On-the-fly, push button adjustments High-speed response time: full range adjustment takes place in less than one second 1.5-inch 6061-T6 aluminum type III hard-anodized bodies LED back-lit handlebar switch FOX Ice Scraper Technology (FIST) Advanced high-flow, deflective disc velocity-sensitive damping Air sleeve piggyback with gas-charged internal floating piston (IFP) design Fully re-buildable and re-valvable |
TOP MOUNT | Eyelet |
BOTTOM MOUNT | Eyelet |
FITMENT NOTES | Complete Vehicle |
PART NUMBER | 854-21-018 |
FEATURES |
Burandt-specific tuning Complete shock kit (four shocks) Optimized lightweight shock design Spiral groove bypass One-piece, aluminum spherical bearings Plug ‘n Play wiring harness Bosch ECU On-the-fly, push button adjustments High-speed response time: full range adjustment takes place in less than one second 1.5-inch 6061-T6 aluminum type III hard-anodized bodies LED back-lit handlebar switch FOX Ice Scraper Technology (FIST) Advanced high-flow, deflective disc velocity-sensitive damping Air sleeve piggyback with gas-charged internal floating piston (IFP) design Fully re-buildable and re-valvable |
TOP MOUNT | Eyelet |
BOTTOM MOUNT | Eyelet |
FITMENT NOTES | Complete Vehicle |
854-21-018 Also Fits
Year | Make | Model | Sub Model | Drive Type | Fuel Type | Body Num Doors | Type | Position | Lift Height | Comments | Price |
---|---|---|---|---|---|---|---|---|---|---|---|
2023 | Polaris | 650 RMK Khaos Slash 146 | All | All | All | All | All | Front and Rear | All | Complete Vehicle | $4,499.99 |
2024 | Polaris | 650 RMK Khaos Slash 146 | All | All | All | All | All | Front and Rear | All | Complete Vehicle | $4,499.99 |
2023 | Polaris | 850 RMK KHAOS 155 | All | All | All | All | All | Front and Rear | All | Complete Vehicle | $4,499.99 |
2024 | Polaris | 850 RMK KHAOS 155 | All | All | All | All | All | Front and Rear | Complete Vehicle | $4,499.99 |
TUNING & MANUALS
-
01
OWNER'S MANUAL
Full overview manual including tuning, installation, and general owner's manual.
-
03
Service
Get ServiceKeep your suspension performing at factory levels. Get service or upgrade your suspension.